Milestone Remote Client 3.5 - Manual (Page 31)

Milestone XProtect Remote Client 3.5; User’s Manual
www.milestonesys.com Page 31 Viewing Live Video
Preset positions are defined by the system administrator; the Presets list will be empty if no preset
positions have been defined for the selected PTZ camera.
Tip: You may be able to use a joystick for controlling your PTZ cameras. Joystick control is
configured on the Remote Client’s Setup tab. See Further Configuration on page 21.
Note: Even though joystick and point-and-click control is supported for a large number of PTZ
cameras, not all PTZ cameras may be controlled this way. Consult your surveillance system
administrator if in doubt about joystick support for cameras; your surveillance system
administrator will be able to find information about joystick support for cameras in the release note
for your organization’s Milestone XProtect surveillance system.
IPIX PTZ Positions for Fisheye Cameras
You are able to move to a specific position in a fisheye camera image, and then save that position
by clicking the Save button.
When you later want to return to the saved position, click the Load button.