Milestone Remote Client 3.5 - Manual (Page 24)

Milestone XProtect Remote Client 3.5; User’s Manual
2. In the Group Control section, click the Delete button. You will be asked to confirm that you
want to delete the group and all of its views.
Renaming Views
To rename a view, do the following:
1. Select the required view in the Views section.
2. In the View Control section, overwrite the existing name in the View Name field.
3. Click the Rename button.
Deleting Views
To delete a view, do the following:
1. Select the required view in the Views section.
2. In the View Control section, click the Delete button. You will be asked to confirm that you
want to delete the view.
Adjusting Camera Settings
In the Setup tab’s Camera Control section, you are able to adjust camera settings. To adjust
camera settings, select the position of the required camera in the view. The position you select will
be indicated by a bold border.
Image Quality
The Image Quality setting determines the quality of the video when viewed, but also affects
bandwidth usage. If the Remote Client is used over the internet, over a slow network connection,
or if for other reasons you need to limit the bandwidth used by the Remote Client, image quality
can be reduced on the server side by selecting e.g. Low or Medium
Tip: You can quickly reduce the bandwidth usage for all cameras in the view by reducing the
image quality for a single camera, then clicking the Apply To All button.
Tip: If you have selected reduced image quality for a camera, video from the camera will be
displayed in full quality when viewed enlarged (see Enlarging Images from a Particular Camera on
page 28 and 32).
Frame Rate
The Frame Rate setting lets you select a frame rate for the selected camera. Default is Unlimited.
www.milestonesys.com Page 24 Further Configuration