Milestone Remote Client 3.5 - Manual (Page 29)

Milestone XProtect Remote Client 3.5; User’s Manual
Camera image; enlarged detail shows image bar
The image bar displays the name of the camera as well as the name of the device to which the
camera is connected. The device name is displayed first, in square brackets, followed by the
camera name.
Each image bar will display the word Live when live video is displayed, and the word Stopped if the
camera is stopped.
Each image bar features three colored indicators:
• Event indicator (the leftmost of the three indicators, solid yellow): Lights up when
specific events, defined by the surveillance system administrator, occur. Click anywhere
inside the image to reset the event indicator. This indicator may appear black if event
indication has not been specified for the camera in question, of if no specified events
have occurred. Consult your surveillance system administrator if in doubt.
• Motion indicator (the indicator in the middle, solid red): Lights up when motion is
detected in the image. Click anywhere inside the image to reset the motion indicator.
• Online indicator (the rightmost of the three indicators, blinking green): Changes state
every time an image is received from the camera.
Enlarging Images from a Particular Camera
To enlarge images from a particular camera in a view, double-click the blue image bar above the
image.
Double-clicking blue bar above image enlarges view
To return to normal view, simply double-click the blue image bar again.
Tip: If you have selected reduced image quality for the camera (on the Setup tab), images
from the camera will be displayed in full quality when viewed enlarged.
www.milestonesys.com Page 29 Viewing Live Video