4 display backlight and contrast, Upper function set, Set contrast – UEi Test Instruments KM9106/P User Manual

Page 16: 5 pump

Advertising
background image

KM9106 Operators Manual

16

5.4

DISPLAY BACKLIGHT AND CONTRAST

The display contrast can be adjusted to suit different lighting conditions and the
backlight can be switched on or off.

TO TOGGLE THE BACKLIGHT ON /OFF

Press UPPER FUNCTION followed by



TO SET THE CONTRAST

Press the followed by

UPPER FUNCTION key

-- -- -- -- -- -- -- -- -- -- -- -- --

UPPER FUNCTION

SET

-- -- -- -- -- -- -- -- -- -- -- -- --

Pressing the key displays

SET

CONTRAST

Hold down either the or key and release once the desired level is
set.

Press

to confirm setting.


NOTE: The screen may flip from all dark to blank very quickly. Do not panic this

is normal - keep pressing the same key until the desired level is displayed.


TIP:

If for any reason the display is not visible at switch on, simply
disconnect the handset for a few seconds and re-connect. Then reset
the display contrast as detailed above.

5.5 PUMP

The Pump can be toggled on or off from the handset.

TO TOGGLE THE PUMP ON /OFF


Press


TIP:

When the pump is switched off the O

2

reading will go down as the

oxygen sensor consumes the oxygen in its housing!

SET/CAL

CONTRAST

CONTRAST

PUMP

ENTER

Advertising