UEi Test Instruments KM9106/P - Manual (Page 41)

KM9106 Operators Manual 41
ENTER the desired location to display the memory FROM. Entering numbers is
detailed in section 6.
LOG NO.
DATE
TIME
BATTERY % 0100
23/10/96
10:32:36
54
To scroll through data, use and , note the log starts with the Log
Number followed by Quintox data. Note also that once at the top of a log the
will take you to the top of the previous log i.e.
LOG NO.
DATE
TIME
BATTERY % 0099
23/10/96
10:31:36
54
Using the
will scroll through that particular log moving one line at a time.
DATE
TIME
BATTERY %
INSTABILITY 23/10/96
10:31:36
54
1
To exit Display Memory, press and together and return to the
LOGGER DISPLAY.
8.4 Downloading Information
Data can either be downloaded from the handset or stored directly in a PC realtime.
To extract the data from the handset contact Kane International for information of the
FIREWORKS range of software. The software allows information to be extracted
from the handset or gather information from the PC.
Other features of the FIREWORKS software are :-
•
Graph and print stored and realtime data.
• Display information on bar graphs and large LED type display.
• Compile tuning reports and emissions reports.
• View data stored in tabular format.
• Export files to spreadsheet format.
• Allow the PC to act as a virtual handset and control the Quintox.
Stored data can not be extracted from the handset without the FIREWORKS software.
Information can be captured from the RS232 on the Quintox. A standard RS232 serial
lead is required to connect the Quintox RS232 to the PC serial port. Contact your
computer supplier or Kane International for the required lead. Leads are supplied with
the FIREWORKS software.