UEi Test Instruments KM9106/P - Manual (Page 40)

KM9106 Operators Manual 40
LOG DATA ?
NO
ENTER YES to tell the logger to store data in memory and NO to disable the logging
function.
DOWNLOAD MEMORY
NO
Download Memory allows you to output the stored information to a PC, output is in
our own format and requires a special program to extract the data. Contact Kane
International or Distributor for information on the ‘Fireworks’ range of software.
Selecting YES will set the handset in READY mode, this allows the PC software to
access the data stored.
READY
Once the PC has extracted the data from the handset the logger will revert back to the
LOGGER MENU.
WARNING ! The logger will stay in READY mode until all of the data in extracted
from the handset. Do not enter this mode unless you are going to download data - you
will have to switch OFF the handset if you do.
DISPLAY MEMORY
NO
Display Memory allows you to view stored information on the hand-set display.
Select YES to access the following screen.
DISPLAY MEMORY
SELECT 0000 TO 0123
0000