Avaya 15-601127 - Manual (Page 48)

2420/5420 Phone Page 48
15-601127 Issue 09a (16 July 2009) IP Office
7. Function Keys
7.1 Overview of the Function Keys
Both , function keys and softkeys can be used to access a range of system features. The display adjacent
to the key shows the feature name.
Some of these features are default features supported by the phones (e.g. SpDial, Log, Option and Label on the
softkeys) and are always available. Others are system features that can only be programmed by the system
administrator for function keys.
In addition, there are a number of system features that you can always access yourself by the use of short codes.
Refer to
System Features Introduction for details of system features that you can always access yourself by dialling
short codes, e.g. to listen to your voicemail messages, dial *17.
The main screen has three pages. This means that the eight and function keys on each page could be used for
up to 24 features. However, it is strongly recommended that all three call appearance keys remain at their default
settings. Therefore, there are 21 soft function keys that can be allocated to system features.
To move between pages, press and .
In the following example:
· The first three keys have been set as call appearance lines.
· Keys 4 and 5 have been set to access the Admin and Admin1 programmable functions.
· Key 6 has been set to monitor system park slot 1. The indicates a call is currently parked in slot 1.
· Key 7 has been set to the SAC (Send All Calls) function.
· Key 8 has been set to VMOn, a function which toggle use of the voicemail mailbox as on/off. The indicates that this
function is currently on.
· To display the other two pages of programmed functions set for this phone, press either or .
Changing the labels of the function keys:
You can personalize the function key labels. For example, you can change SAC to Send All for instance. See
Changing
Function Key Labels .
Programming your own features:
If the phone has been setup with either or both the Admin and Admin1 features assigned to display keys, you can select
and program your own feature choices against other keys. See
Function Key Programming .
56
54
50