Call appearance key icons, System features, 2 call appearance key icons – Avaya 15-601127 User Manual

Page 9: 3 system features

Advertising
background image

2420/5420 Phone

Page 9

15-601127 Issue 09a (16 July 2009)

IP Office

The Telephone: Call Appearance Keys

1.2 Call Appearance Key Icons

The icons displayed against the Call Appearance/Feature keys, allow you to determine the status (for example, on
HOLD) of each call. Icons also indicate whether a feature has been activated for a particular button.

·

Incoming Call:
A symbol next to a call appearance key indicates an incoming call.

·

Connected:
A symbol next to a call appearance key indicates that it is the currently connected call. The caller's phone number
(if available) is also shown. To put the call on hold, press

HOLD. An H is displayed.

·

On HOLD:
A

symbol next to a call appearance key indicates a call on hold. To take the call off hold and put any other

current call on hold, press

.

·

Function Active:

The button to the left or right of the function key is active.

1.3 System Features

System Features can only be set against soft Function Keys by your system administrator. However, your system
administrator may allocate you two ‘self administrator’ features that will enable you to add System Features to your soft
Function Keys.

In addition, there are a number of System Features that you can always access yourself by the use of short codes.
Refer to

System Features Introduction

for details of System Features that you can always access yourself by dialling

short codes. For example, to listen to your voicemail messages, dial *17.

56

Advertising