Alpine TMI-M990 - Manual (Page 49)

45
- EN
Setting the S-IN Mode
Setting item: S-IN SIG.
Setting content: ON/OFF
ON:
Display S video output compatible ALPINE head unit source.
OFF: Do not display S video output compatible ALPINE head unit.
• Set when connecting to a S video output compatible head unit.
• You cannot set to OFF when connected to an IONBUS compatible head unit.
• If connected with a DVI-9990, set “Changing Video Output” on the S-VIDEO of DVI-9990.
For details, refer to the DVI-9990 instructions manual.
Name External Equipment to Be Displayed (AUX)
When at least one external device is connected, you can name each as you like.
Setting item: NAME
Setting content: AUX-1, (2, 3)/DVD/VCR/GAME/TV* 1 /CAMERA* 2
* 1 To connect with a TV unit, refer to “TV Operation” page 46.
* 2 CAMERA is only displayed in AUX-3 mode. Set to camera
when the back camera is connected.
• Can be only when AUX IN 1, 2, 3 SIG. is ON.
Name the S Video Input to Be Displayed (S-IN)
If a S video output compatible ALPINE head unit is connected, you can attach a display name you like.
Setting item: NAME
Setting content: AUX/DVD/VCR/GAME/TV
• Only valid when S-IN SIG. is ON.
• Not displayed when changing the source.
You can check the display by pressing DISP./A.MEMO on the remote control.
External Input Audio Level Adjustment
Setting item: INPUT GAIN
Setting content: HIGH/LOW
HIGH: Set external input audio level to high.
LOW: Set external input audio level to low.
• Can be set when AUX IN 1,2,3 SIG. ON.
• Cannot be set to LOW, when the system switch is set to STANDALONE. (Refer to “About
the system switch” (page 54).)