Brother DCP-J140W - Manual (Page 11)

Configuring your machine for a wireless network
7
3
Confirm your network environment
3
Connected to a computer with a WLAN access point/router in the network
(Infrastructure mode)
3
1 WLAN access point/router 1
1 If your computer supports Intel ® My WiFi Technology (Intel ® MWT), you can use your computer as a Wi-Fi Protected Setup supported access
point.
2 Wireless network machine (your machine)
3 Wireless capable computer connected to the WLAN access point/router
4 Wired computer (which is not wireless capable) connected to the WLAN access point/router with
an Ethernet cable
Install method
3
The following instructions will offer three methods for installing your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
 Wireless configuration temporarily using a USB cable uu page 9. (Recommended for Windows
®
users)
 One push configuration using Wi-Fi Protected Setup™ or AOSS™ uu page 12.
 Configuration using the machine’s control panel Setup Wizard uu page 16.
2
1
4
3