Brother DCP-J140W - Manual (Page 24)

Configuring your machine for a wireless network
20
3
Configuration in Ad-hoc Mode (For IEEE 802.11b)
3
Configure the wireless settings
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
Note
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
an SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please
see the information included with your computer or contact your network administrator.
b Press Menu.
c Press a or b to choose 3.Network.
Press OK.
d Press a or b to choose 2.Setup Wizard.
Press OK.
e If WLAN Enable? is displayed, press a for Yes to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
f
The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using a or b.
Press OK.
SSID (Network Name):
Communication Mode Encryption mode Network key
Ad-hoc WEP
NONE
—
For example:
SSID (Network Name):
HELLO
Communication Mode Encryption mode Network key
Ad-hoc WEP 12345678