Brother DCP-J140W - Manual (Page 33)

Control panel setup
29
4
Function table and default factory settings
4
 The factory settings are shown in bold.
1 On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
Main menu Submenu Menu Selections Options
3.Network 1.TCP/IP 1.BOOT Method Auto/Static/RARP/BOOTP/DHCP
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
5.Node Name BRWXXXXXXXXXXXX= (your machine’s Ethernet
address)
(up to 15 characters)
6.WINS Config Auto/Static
7.WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
8.DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
9.APIPA On/Off
2.Setup Wizard — (Choose SSID from list or manually add SSID)
3.WPS/AOSS —
4.WPS w/PIN Code —
5.WLAN Status 1.Status (Examples)
Active(11b)/Active(11g)/Active(11n)/
AOSS Active/Connection Fail
2.Signal Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
3.SSID (Shows SSID with up to 32 digits)
4.Comm. Mode (Examples)
Ad-hoc/Infrastructure
6.MAC Address
7.WLAN Enable
On/Off
0.Network Reset