Brother DCP-J140W - Manual (Page 25)

Configuring your machine for a wireless network
21
3
g
Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)
Press OK.
h
Using a or b, choose Ad-hoc when instructed.
Press OK.
i
Choose the Encryption type None or WEP using a or b, and press OK.
Do one of the following:
If you chose None, go to step k.
If you chose WEP, go to step j.
j Enter the WEP key you wrote down in step a on page 20. Press OK. Go to step k. (For information on
how to enter text, see the Quick Setup Guide.)
k To apply the settings, press a for Yes. To cancel, press b for No.
Do one of the following:
If you chose Yes, go to step l.
If you chose No, go back to step f.
l The machine will attempt to connect to the wireless network you have chosen.
m
A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report.
uu
Quick Setup Guide: Troubleshooting
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary to operate your device, please choose Install MFL-Pro Suite from the
CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary to operate your device, please double-click Start Here OSX on the
CD-ROM.