Aga Ranges Pro+ Dual Fuel U110054 - Manual (Page 24)

22
To cancel the self cleaning cycle
To cancel the self-clean function, hold down the [D] button
and then press the [–] button to set the timer back to ( 0.00).
The heating part of the cycle will end and the cooling part
of the cycle will start. When the oven temperature has fallen
sufficiently the interlock neon will go out and the door will
unlock.
When the door has unlocked turn the oven function control
back to OFF.
 WARNING!
DO NOT attempt to stop the self-clean cycle by
turning the oven function control to OFF. While this
will stop the heating part of the cleaning cycle it
will also stop the ventilation fans from running and
cause the oven thermal cut-out to trip.
To start the self cleaning cycle automatically
By using the timer, the self-clean cycle can be programmed to
turn on and off automatically.
Note: You cannot set the start time directly – this is set
automatically by setting the ‘Cleaning period’ and the ‘Stop
time’.
Set the oven function control to self-clean (Fig.6-10). Press
the [D] button once to set the default cleaning time
(Fig.6-12). To adjust the cleaning cycle duration, hold down
the [D] button and press either the [–] or [+] buttons and set
the time as required.
Now press the [E] button once to bring up the minimum
‘Stop time’ (Fig.6-14) on the display. Press and hold the [E]
button and then press the [+] button until the required ‘Stop
time’ shows (Fig.6-15). Release the buttons.
The self-clean cycle will now start automatically.
To cancel the automatic self cleaning cycle
To return to manual operation the ‘Cleaning period’ must be
cancelled. Press and hold the [E] button and then press the
[–] button until the timer display reads ( 0.00).
Cleaning Table
(Table 6-2)
Cleaners listed are available from supermarkets or electrical
retailers as stated. For enamelled surfaces use a cleaner that is
approved for use on vitreous enamel.
Regular cleaning is recommended. For easier cleaning, wipe
up any spillages immediately.
ArtNo.050-0016 - Cleaning table AGA USA
Burner grates &
top of burner
heads
Burner base
Maintop top
Sides, toe-kick
Control panel
Oven interior
Door handles
Oven racks &
supports
Door inner
Outer door
and drawer
Porcelain enamel
Aluminum
Stainless steel
Painted enamel
Painted enamel
or stainless steel
Porcelain enamel
Chrome plated
aluminum
Chrome
Glass
Painted enamel
or stainless steel
Mildly abrasive cleaner such as
Bon Ami ® or Soft Scrub®.
Dishwasher.
As above.
Hot soapy water, non-abrasive
cleaner, soft cloth.
Hot soapy water and soft cloth.
Non-abrasive cleaner, soft cloth.
Branded oven cleaner suitable for
enamel surfaces. Take care not to
damage the oven door seals.
Non-abrasive cleaner, hot soapy
water, soft cloth.
Dishwasher. Hot soapy water and
scouring pad.
Hot soapy water and soft cloth.
Mildly abrasive cleaner with a soft
cloth.
Multi-surface cleaner, soft cloth.
Part Finish
Recommended
cleaning method
ArtNo.302-0005 -
6BC Stopping the oven 1
Fig.6-14
ArtNo.302-0005a -
6BC Stopping the oven 1a
Fig.6-15
Table 6-2