Brother MFC-J4610DW - Manual (Page 51)

37
4
4
How to send a fax
4
The following steps show how to send a fax.
a
Do one of the following to load your
document:
 (MFC-J4410DW and MFC-J4610DW)
Place the document face down in the
ADF. (See Using the ADF
(MFC-J4410DW and
MFC-J4610DW) on page 34.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 35.)
NOTE
• To send color faxes with multiple pages,
use the ADF
1
.
• If you send a black & white fax from the
ADF
1
while the memory is full, it will be
sent in real time.
• You can use the scanner glass to fax
pages of a book one at a time. The
document can be up to Letter or A4 size.
• Since you can only scan one page at a
time using the scanner glass, it is easier to
use the ADF
1 if you are sending a
multiple-page document.
1 MFC-J4410DW and MFC-J4610DW only.
b
When you want to send a fax or change
the settings for sending or receiving
faxes, press (Fax).
 The Touchscreen shows:
c
You can change the following
fax-sending settings. Press Options.
Press s or t to scroll through the fax
settings. When the setting you want is
displayed, press it and choose your new
option. When you are finished changing
the options, press OK.
(Basic User’s Guide)
For information about changing the
following fax-sending settings, see
pages 38 to 40.
 Glass ScanSize
 Color Fax Transmission
 Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(See Advanced User’s Guide: Sending
a fax.)
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at the end of a call
 Broadcasting
 Real Time Transmission
 Overseas Mode
 Delayed Fax
 Batch Transmission
 Canceling Waiting Jobs
 Polled Transmit
Sending a fax
4