Brother MFC-J4610DW - Manual (Page 69)

55
7
7
How to dial
7
Manual dialing
7
a
Load your document.
b
Press (Fax).
c
Press all of the digits of the fax number.
d
Press Fax Start.
Speed Dialing
7
a
Load your document.
b
Press (Fax).
c
Press (Address).
d
Do one of the following:
 Press Alphabetical or
Numerical, and then press the
number you want to dial.
 Press the 2-digit Speed Dial number
using the dial pad.
NOTE
If the Touchscreen shows
Not Registered when you enter a
Speed Dial number it means a number
has not been stored at this location.
e
To send a fax, press Send a fax and
go to step f.
f
Press Fax Start.
The machine scans and sends the fax.
Fax Redial
7
If you are sending a fax automatically and the
line is busy, the machine will redial once after
five minutes.
Redial only works if you dialed from the
machine.
a
Load your document.
b
Press (Fax).
c
Press Redial.
d
Press Fax Start.
NOTE
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• If you are sending a fax manually and the
line is busy, press Hook before performing
step c above.
• Redial will change to Pause when you
enter a fax number.
Dialing and storing numbers
7