Brother MFC-9120CN - Manual (Page 32)

Chapter 2
16
Note
• Put the paper into the manual feed slot
with the side to be printed face up.
• Make sure that the print media is straight
and in the proper position on the manual
feed slot. If it is not, the paper may not be
fed properly, resulting in a skewed printout
or a paper jam.
• Do not put more than one sheet of paper
in the manual feed slot at any one time, as
it may cause a jam.
• Pull the paper out completely when you
retry putting the paper into the manual
feed.
• If you put paper or other print media in the
manual feed slot before the machine is in
the Ready mode, an error may occur and
the machine will stop printing.
• To easily remove a small printout from the
output tray, lift up the scanner by using
both hands as shown in the illustration.
• You can still use the machine while the
scanner is up. To close the scanner, push
it down with both hands.
• When the top cover is open, you cannot
open the scanner.