Brother MFC-9120CN - Manual (Page 41)

25
3
3
Mode Timer
3
The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
This setting also sets the time the machine
will change from individual user to the Public
mode when using Secure Function Lock.
(See Switching Users on page 32.)
a
Press Menu, 1, 1.
General Setup
1.Mode Timer
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.
Paper settings
3
Paper Type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu, 1, 2, 1.
Paper
1.Paper Type
b
Press a or b to choose Thin, Plain,
Thick, Thicker or
Recycled Paper.
Press OK.
c
Press Stop/Exit.
Paper Size
3
You can use ten sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5,
A5 L, A6, B5, B6 and Folio and four sizes for
printing faxes: A4, Letter, Legal or
Folio (8.5"
×13").
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Press Menu, 1, 2, 2.
Paper
2.Paper Size
b
Press a or b to choose A4, Letter,
Legal, Executive, A5, A5 L, A6, B5,
B6 or Folio.
Press OK.
c
Press Stop/Exit.
General Setup
3