Brother MFC-9120CN - Manual (Page 50)

Chapter 4
34
Setting Lock
4
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or Brother Customer Service.
While Setting Lock is On, you cannot change
the following settings without a password:
„ Date/Time
„ Station ID
„ Quick Dial settings
„ Mode Timer
„ Paper Type
„ Paper Size
„ Volume
„ Auto Daylight
„ Ecology
„ LCD Contrast
„ Setting Lock
„ Secure Function Lock (MFC-9320CW)
„ Memory Security (MFC-9120CN)
„ Dial Restriction
Setting up the password
4
a
Press Menu, 1, 7, 2.
Security
2.Setting Lock
b
Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c
Re-enter your password when the LCD
shows Verify:.
Press OK.
d
Press Stop/Exit.
Changing your Setting Lock
password
4
a
Press Menu, 1, 7, 2.
Security
2.Setting Lock
b
Press a or b to choose Set Password.
Press OK.
c
Enter your four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
Re-enter your new password when the
LCD shows Verify:.
Press OK.
f
Press Stop/Exit.