Brother MFC-9320CW - Manual (Page 162)

Troubleshooting
151
14
e If you have tried step a to step d above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. (For information on how to reset to the default
factory settings, see Restoring the network settings to factory default on page 79.)
f
(For Windows
®
)
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and re-
install the drivers. (For how to disable the Firewall, see General problems on page 147.) If you are using
personal Firewall software, see the user’s guide for your software or contact the software manufacturer.