Brother MFC-9320CW - Manual (Page 48)

Configuring your machine for a wireless network (For MFC-9320CW)
37
3
r Enter the user name you wrote down in step a on page 34. Press OK. Go to step s. (To enter text using
keypad, see Entering Text on page 189.)
USER:
s Enter the password you wrote down in step a on page 34. Press OK. Go to step t. (To manually enter
the text, see Entering Text on page 189.)
PASS:
t To apply the settings, choose Yes. To cancel, choose No.
Apply Settings?
1.Yes 2.No
If you chose Yes, go to step u.
If you chose No, go back to step h.
u
The machine starts to connect to the wireless device you have chosen.
v
If your wireless device is connected successfully, the display shows Connected for one minute and
configuration is completed.
Connected
If the connection failed, the display shows Connection Fail for one minute. See Wireless network
troubleshooting (For MFC-9320CW) on page 156.
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.