Gateway (and router), Step by step chart, 2gateway (and router) – Brother MFC-9320CW User Manual
Page 25
Configuring your machine for a network
14
2
Gateway (and router)
2
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.
Step by step chart
2
a
Configure the TCP/IP settings.
b
Change the print server settings.
Configure the IP address
i
Configure the subnet mask
i
Configure the gateway
i
Using the BRAdmin Light utility
i
Using the BRAdmin Professional 3 utility
i
Using the control panel
i
Using the Web Based Management (web browser)
i
Using the Remote Setup
i
Using other methods
i