Brother MFC-9320CW - Manual (Page 77)

Control panel setup
66
6
Auth. for SMTP
6
You can specify the security method for E-mail notification. (For details on security the methods for E-mail
notification, see Security methods for E-mail notification on page 123.)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose Auth. for SMTP.
Press OK.
f
Press a or b to choose None, SMTP-AUTH or POP bef.SMTP.
Press OK.
g If you chose None or POP bef.SMTP in step f, go to step k.
If you chose SMTP-AUTH in step f, go to step h.
h
Enter the account name for SMTP authentication.
Press OK.
i
Enter the account password for SMTP authentication.
Press OK.
j Enter the account password again.
Press OK.
k Press Stop/Exit.
POP3 Server
6
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose POP3 Server.
Press OK.