Wins config – Brother MFC-9320CW User Manual
Page 67
Control panel setup
56
6
e
Press a or b to choose Node Name.
Press OK.
f
Press 1 to choose Change.
g
Enter the Node Name using the dial pad. (To enter numbers and text, see Entering Text on page 189.)
Press OK.
h
Press Stop/Exit.
WINS Config
6
This selection controls how the machine obtains the IP address of the WINS server.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Config.
Press OK.
f
Press a or b to choose Auto or Static.
Press OK.
g
Press Stop/Exit.
Auto
6
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
6
Uses a specified IP address for the primary and secondary WINS servers.