Brother MFC-9320CW - Manual (Page 181)

Appendix B
170
B
1 On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
MFC-9120CN
B
The factory settings are shown in Bold with an asterisk.
4.Network
(continued) 1.TCP/IP
(continued) 0.IPv6 On
Off*
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
0.Network
Reset 1.Reset 1.Yes
2.No
2.Exit
Main menu Submenu Menu selections Options
5.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
Main menu Submenu Menu selections Options