Brother MFC-440CN - Manual (Page 116)

Chapter 14
104
Borderless printing
14
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to choose Borderless.
Press OK.
b
Press a or b to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Setting your changes as a
new default
14
You can save the print settings you use most
often by setting them as default. These
settings will stay until you change them again.
a
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
14
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset
.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.