Brother MFC-440CN - Manual (Page 59)

Receiving a Fax
47
6
F/T Ring Time
(Fax/Tel mode only)
6
If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive
.
Press OK.
d
Press a or b to choose
F/T Ring Time
.
Press OK.
e
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.
f
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
Fax Detect
6
If Fax Detect is On:
6
The machine receives a fax call
automatically, even if you answer the call.
When you see Receiving on the LCD or
when you hear “chirps” through the handset
you are using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Semi: (MFC-660CN and
MFC-845CW only)
6
The machine will only receive a fax call
automatically if you answered it using the
machine’s handset, cordless handset or
Speaker Phone. If you answered at an
extension phone, press l 5 1. (See
Operation from extension telephones
on page 56.)
If Fax Detect is Off:
6
If you are at the machine and answer a fax
call by lifting the handset, press Mono Start
or Colour Start, then press 2 to receive the
fax.
If you answered at an extension phone, press
l
5 1. (See Operation from extension
telephones on page 56.)