Brother MFC-440CN - Manual (Page 72)

Chapter 8
60
Fax Redial
8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last 30
numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a
Press Redial/Pause.
b
Press a or b to choose the number you
want to redial.
Press OK.
c
Press a or b to choose Send a Fax.
Press OK.
d
Press Mono Start or Colour Start.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Outgoing Call
8
The last 30 numbers you telephoned
(MFC-660CN and MFC-845CW only) or sent
a fax to will be stored in the outgoing call
history. You can choose one of these
numbers to telephone (MFC-660CN and
MFC-845CW only), fax to, add to Speed-Dial,
or delete from the history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b
Press a or b to choose the number you
want to call.
Press OK.
c
Do one of the following:
„ (MFC-660CN and MFC-845CW
only)
To make a phone call, press a or b
to choose Make a Phone Call.
Press OK.
„ To send a fax, press a or b to
choose Send a Fax.
Press OK.
„ If you want to store the number,
press a or b to choose
Add to Speed-Dial
.
Press OK.
(See Storing Speed-Dial numbers
from Outgoing Calls on page 62.)
„ Press a or b to choose Delete.
Press OK.
Press 1 to confirm.