Brother MFC-440CN - Manual (Page 38)

Chapter 3
26
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup
.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
e
Press a or b to choose Low, Med,
High
or Off
Press OK.
f
Press Stop/Exit.
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup
.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
Press OK.
e
Press a or b to choose Low, Med,
High
or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone (MFC-660CN and
MFC-845CW only).
a
Press Speaker Phone.
b
Press d or c .
This setting will stay until you change it
again.
c
Press Speaker Phone.
Note
You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing
d or c
(MFC-660CN and MFC-845CW only).