Brother MFC-440CN - Manual (Page 61)

Receiving a Fax
49
6
Receiving faxes into memory
(Monochrome only)
6
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed
; put some paper in the paper
tray. (See Loading paper and other media
on page 16.) If you are unable to put paper in
the paper tray the following will happen:
If Memory Receive is On:
6
The machine will carry on receving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored into
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put paper in the tray.
If Memory Receive is Off:
6
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory if enough memory is available. The
machine will then stop automatically
answering calls until paper is put in the paper
tray. To print the last fax you received, put
paper in the tray.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive
.
Press OK.
d
Press a or b to choose
Memory Receive
.
Press OK.
e
Press a or b to choose On (or Off).
Press OK.
f
Press Stop/Exit.
Receiving a fax at the end of a
conversation (MFC-660CN
and MFC-845CW only)
6
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up.
a
Ask the other person to place the
document in their machine and to press
the Start or Send key.
b
When you hear the other machine's
CNG tones (slowly repeating beeps),
press Mono Start or Colour Start.
c
Press 2 to receive a fax.
d
Replace the handset.
Printing a fax from the
memory
6
If you have chosen fax storage, you can still
print a fax from the memory when you are at
your machine. (See Fax Storage
on page 73.)
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Advanced Fax Operation
.
Press OK.
d
Press a or b to choose
Print Document
.
Press OK.
e
Press Mono Start.