Canon imagePROGRAF iPF6450 - Manual (Page 142)

Messages regarding ink Messages regarding ink
Ink insufficient. ............................................................................................................................................................... 142
No ink left. ........................................................................................................................................................................ 142
Remaining level of the ink cannot be correctly detected. Check ink tank. ......................................... 142
Cannot detect ink level correctly. Close tank cover. ..................................................................................... 142
Close Ink Tank Cover .................................................................................................................................................. 142
Ink tank is empty. .......................................................................................................................................................... 143
Not much ink is left. ..................................................................................................................................................... 143
Check if ink tank is set, and its color and direction. ..................................................................................... 143
The following ink tanks cannot be recognized. ............................................................................................... 143
Do not pull out ink tank. ............................................................................................................................................ 143
Ink insufficient. Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead,
or do other operations that require ink. Press the OK button and replace the Ink Tank that is low with a new Ink
Tank.
(See "Replacing Ink Tanks.")
→P.31
No ink left. No ink left.
Cause Corrective Action
There is no ink left.
There are no ink colors with × displayed above the re-
maining ink indicator. Press the OK button, open the Ink Tank Cover, and replace the Ink Tank for the
color that is out of ink.
(See "Replacing Ink Tanks.")
→P.31
Remaining level of the ink cannot be correctly detected. Check ink tank. Remaining level of the ink cannot be correctly detected. Check ink tank.
Cause Corrective Action
Ink level detection cannot work correctly if
you use refill ink tanks. The refill ink tank can no longer be used. See the section Ink level detection and take the
appropriate action. (See "Ink Level Detection.")
→P.130
Cannot detect ink level correctly. Close tank cover. Cannot detect ink level correctly. Close tank cover.
Cause Corrective Action
The remaining ink level could not be correctly detected. Close the Ink Tank Cover.
The buzzer stops sounding.
Next, "No ink left." is displayed and see "No ink left.."
→P.142
Close Ink Tank Cover Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink insufficient. iPF6450
Basic Guide
Error Message
Messages regarding ink
142