Canon imagePROGRAF iPF6450 - Manual (Page 86)

Software Installation Software Installation
Installing the Printer Driver (Windows) Installing the Printer Driver (Windows)
Installing the Software Installing the Software
The basic instructions for installing the software are as follows.
For detailed instructions, see the Setup Guide.
Supported connection methods
The printer driver works over USB or network (TCP/IP) connections.
The driver installation procedure varies depending on the type of connection.
Follow these steps to install the software and Electronic manuals.
Installing the software and electronic manuals
Important
• When setting up a USB connection, connect the USB cable during printer driver installation following the instructions
displayed.
If you accidentally connect the USB cable first, the printer driver may not be installed correctly.
• When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you reinstall the
printer. In this case, be sure to reconfigure the printer's IP address.
1
Turn the computer on.
When setting up a TCP/IP (network) connection, after making sure the printer is on, connect the LAN cable
to the Ethernet port on the back of the printer and to your network hub port.
2
Insert the provided User Software CD-ROM for the
appropriate operating system in the CD-ROM drive.
3
Follow the instructions displayed to complete instal-
lation.
Installing the Software (Windows) iPF6450
Basic Guide
Software Installation
Installing the Printer Driver (Windows)
86