Canon imagePROGRAF iPF6450 User Manual
Page 19
Important
•
One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause paper jams.
•
Before feeding paper or printing, make sure the sheet is flat against the Paper Tray Cover. The sheet may jam if it curls
before feeding or printing and the trailing edge drops toward the front.
•
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
•
Load the paper straight. Loading paper askew will cause an error.
Note
•
The loading method for a printer with a Spectrophotometer Unit (option) is the same as for a printer with no Spectropho-
tometer Unit (option). If it is difficult to perform operations from the front of the printer, lower the Up-down Unit. (See
"Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.")
•
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
1
Open the Paper Tray Cover (a), and then open the
Tray Extension (b).
2
Slide the Width Guide (a) to align it with the mark
for the size of paper you will load.
iPF6450
Loading Sheets in the Feed Slot
Handling Paper
Handling sheets
19