Canon PowerShot G1 X - Manual (Page 14)

Initial Preparations
14
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the o marks on the battery and
charger, insert the battery by pushing it in
(
) and down ( ).
Charge the battery.
z For CB-2LC: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
For CB-2LCE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
Remove the battery.
z After unplugging the battery charger, remove
the battery by pushing it in (
) and up ( ).
Charging the Battery
CB-2LC
CB-2LCE
COP
Y