Canon PowerShot G1 X - Manual (Page 194)

Using Optional Accessories
194
These optional flash units can provide bright lighting and meet a variety of
flash photography needs.
Attach the flash unit to the hot
shoe.
Turn the flash on, and then turn the
camera on.
X A red h icon is now displayed.
X The flash pilot lamp will light up when the
flash is ready.
Choose shooting mode G, M,
B, or D.
z Flash settings can only be configured in
these modes. In other modes, the flash is
adjusted and fired automatically, as needed.
Set the white balance to
h (p. 100).
Configure settings for the external
flash.
z Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
button.
X Options already set on the flash itself are
displayed.
z Press the op buttons or turn the 7 dial to
choose an item, and then adjust the setting
by pressing the
qr buttons.
z Available settings vary depending on the
shooting mode and the flash attached
(p. 200).
Speedlite 580EX II/430EX II/320EX/270EX II
Still Images Movies
COP
Y