Canon PowerShot G1 X - Manual (Page 149)

Protecting Images
149
Choose [Select].
z Following step 2 on p. 148, choose [Select]
and press the
m button.
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button. is displayed.
z To cancel protection, press the m button
again. is no longer displayed.
z Repeat this process to specify other images.
Protect the images.
z Press the n button. A confirmation
message is displayed.
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
Choosing Images Individually
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
COP
Y