Canon PowerShot G1 X - Manual (Page 170)

Adjusting Basic Camera Functions
170
Adjust screen brightness as follows.
z Choose [LCD Brightness], and then press the
qr buttons to adjust the brightness.
Customize the start-up screen shown after you turn the camera on as follows.
z Choose [Start-up Image], and then press the
m button.
z Press the qr buttons or turn the 7 dial to
choose an option.
Screen Brightness
• For maximum brightness, press and hold the p button for at least one second
when the shooting screen is displayed or when in single-image display. (This
will override the [LCD Brightness] setting on the
3 tab.) To restore the original
brightness, press and hold the p button again for at least one second or restart
the camera.
Start-up Screen
No start-up image
1, 2
Preset images
(cannot be modified)
3
Preset images
Assign desired shots, or use the included
software to change the image.
COP
Y