Canon PowerShot G1 X - Manual (Page 20)

Initial Preparations
20
The display language can be changed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqr buttons or turn the 7 dial
to choose a language, and then press the m
button.
X Once the display language has been set, the
setting screen is no longer displayed.
Display Language
• A clock icon is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the m button to
dismiss the clock icon and repeat step 2.
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
COP
Y