Cop y – Canon PowerShot G1 X User Manual
Page 196
Using Optional Accessories
196
Attach the macrolite adapter.
z
Align the z mark on the macrolite adapter
with the z mark on the camera, and then turn
the adapter in the direction of the arrows until
it locks in place.
z
To remove the adapter, hold down the ring
release button and turn the adapter in the
opposite direction.
Attach the controller to the camera.
z
Attach the control component of the macro
ring lite to the hot shoe on top of the camera.
Attach the flash unit to the
macrolite adapter.
z
Press the release buttons on both sides of
the macro ring lite and attach the macro ring
lite to the macrolite adapter.
Choose shooting mode
G, M,
B, or D.
z
Flash settings can only be configured in
these modes. In other modes, the flash is
adjusted and fired automatically, as needed.
Set the white balance to
h (p. 100).
Enter
e mode (p. 105).
COP
Y