Cop y – Canon PowerShot G1 X User Manual
Page 161
Editing Still Images
161
You can specify a portion of an image to save as a separate image file.
Choose [Trimming].
z
Press the
n button, and then choose
[Trimming] on the
1 tab (p. 41).
Choose an image.
z
Press the
qr buttons or turn the 7 dial to
choose an image, and then press the
m
button.
Adjust the cropping area.
X
A frame is displayed around the portion of the
image to be cropped.
X
The original image is shown in the upper left,
and a preview of the image as cropped is
shown in the lower right.
z
To resize the frame, move the zoom lever.
z
To move the frame, press the
opqr buttons.
z
To change the frame orientation, press the
m button.
z
Faces detected in the image are shown with
gray frames around them (in the upper-left
image), which can be used for cropping.
Switch between frames as needed by turning
the
7 dial.
z
Press the
n button.
Save as a new image and review.
z
Follow steps 4 – 5 on p. 160.
•
Editing is not possible for images saved as
in step 3.
•
RAW images cannot be edited.
•
Images cannot be resized to a higher resolution.
Cropping
Cropping Area
Preview of Image
After Cropping
Resolution After Cropping
COP
Y