Reviewing an mxf clip, Reviewing an mxf clip 104, 104) to – Canon EOS C500 User Manual

Page 104: Cop y

Advertising
background image

Reviewing an MXF Clip

104

Reviewing an MXF Clip

When the camera is in

mode, you can review the last clip that was

recorded on a CF card.

1 Open the [Rec Review] submenu to set the review length.

[w Other Functions] > [Rec Review]

2 Select the desired option and then press SET.

3 After you finish recording, press the

u

button.

• The last clip that was recorded is played back without audio for the

selected duration. [Ð REVIEW] appears at the top of the screen.

• Press the CANCEL button to stop reviewing the clip and change the

camera back to record pause mode.

• After the clip finishes playing back, the camera returns to record pause

mode.

Options

NOTES

• When you are using a special recording mode (A 105), you cannot review a clip.

• If the camera switched CF cards during a recording, the camera will play back the clip on the CF card most

recently recorded on.

Operating modes:

[Entire Clip]:

Allows you to review the entire clip.

[Last 4 sec]:

Allows you to review just the last 4 seconds of the clip.

[w Other Functions]

[

Rec Review]

[Entire Clip]

COP

Y

Advertising
This manual is related to the following products: