Canon EOS C500 - Manual (Page 150)

Developing RAW Clips
150
Developing RAW Clips
Use the Cinema RAW Development software to develop RAW clips recorded on an external recorder
connected to the camera’s 3G-SDI terminals. After you develop the clips and export them to a full-quality
standard file type such as DPX, they will be ready for color grading. Visit your local Canon Web site to download
the software and receive the latest information on it. Refer to the instruction manual (PDF file) included with the
software for details on its use.
System Requirements
These are the system requirements as of October 2013.
The following are the minimum requirements.
The following are the recommended requirements for previewing RAW clips with a frame rate of 24 fps.
1
The computer must have the listed OS pre-installed.
2
The following models are not compatible: iMac (Late 2006), Mac mini (Mid 2007), MacBook (Late 2006, Mid 2007, Late 2007,
Early 2008), MacBook Air (Early 2008).
3 With a compute capability of 2.0 or higher. Computers without a compatible GPU will have decreased processing performance.
4
Required only when checking SDI output on an external monitor.
5
We recommend keeping RAW clips on a separate drive from the save destination of developed clips.
NOTES
• For details on precautions and restrictions, refer to the documentation supplied with Cinema RAW
Development.
Installing and Uninstalling Cinema RAW Development (Windows)
Installing Cinema RAW Development
1 Double-click crdw-*****.zip, the file that you downloaded from the Canon Web site, to decompress it.
• The folder crdw-***** will be created that contains the file crdw***.exe.
2 Select your area.
3 Select your country/region and then click Next.
• If you selected Asia or Oceania in step 2, skip to step 5.
4 Select the language to be displayed during installation.
Operating modes:
OS
1
Windows 7 SP1, Windows 8
(64-bit ver. only, regardless of OS)
Mac OS X v10.7 or 10.8
2
CPU Intel® Core i3/i5/i7 or Xeon –
GPU NVIDIA CUDA-compatible GPU
3
RAM 4 GB
SDI expansion card
4
AJA KONA 3G-SDI with drivers v10.3.2 AJA KONA 3G-SDI with drivers v10.4.2
Display 1024 x 768 resolution
OS
1
Windows 7 SP1, Windows 8
(64-bit ver. only, regardless of OS)
Mac OS X v10.8.3
CPU Intel® Core i7, 3.06 GHz Intel® Xeon, 2.8 GHz, Quad Core
GPU NVIDIA GeForce GTX680 NVIDIA Quadro K5000 for Mac
RAM 16 GB
Hard disk Any with read/write speed of 300 MB/s
5
COP
Y