Canon EOS C500 - Manual (Page 127)

127
Playing Back MXF Clips
• Press the Ò button again or press SET to pause/resume the playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the cover of the CF card slot being accessed.
NOTES
• You may notice brief stops in video or audio playback between clips.
Onscreen Displays
1 Appears when [£ LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].
2
Appears when [£ LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].
3
When playing back clips that were recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will
both be displayed.
7 8 9 10
14
11
12
18
19
20
1
2
4
5
6
13
16
15
3 17
1 Remaining battery time (A 56)
2 Joystick guide (A 128)
3 Shutter speed 1 (A 67)
4 2 Aperture value 1 (A 74)
5 ISO speed/Gain 1 (A 70)
6 Recording date and time 2
7 Playback operation
8 Selected CF card
9 Relay recording
10 $ mark/% mark (A 103, 132)
11 Time code (A 84)
12 Clip number / Total number of clips
13 Bit rate (A 64)/Recording mode (A 60)
14 Resolution (A 62, 64)
15 Frame rate (A 60)
3
16 Embedded custom picture file (A 114)
17 Output displays (A 149)
18 User bit (A 87)
19 Audio output channel (A 96)
20 Audio level meter
COP
Y