Canon EOS C500 - Manual (Page 56)

Recording Video
56
NOTES
• You can press the DISP. button to switch the onscreen displays in the following sequence.
Show all onscreen displays
 show only onscreen markers*  hide all onscreen displays.
* Only when the [£ LCD/VF Setup] > [Markers] setting is enabled.
1 CF card status/available recording time
• The following indicates the CF card status.
2/3 Can record on CF card
4/5 No CF card or cannot record on CF card
The CF card selected for recording is indicated with a Ð mark.
2 CF card recording operation (4K and 2K modes)
• When double slot recording (A 46) is activated, the 4 icon will appear to the left of the operation
indicator.
10 Remaining battery time
• The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the
battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to
the icon.
• и
 й  к  л  м (in red).
When ì is displayed, replace the battery pack with a fully charged one.
• Depending on the conditions under which the camera and the battery pack are used, the actual battery
charge may not be indicated accurately.
12 Recording command status (4K and 2K modes) / Recording operation (MXF mode)
• In MXF mode, when double slot recording (A 46) is activated, the 4 icon will appear to the left of the
operation indicator. Also, ` does not appear in the indicator.
• Pre-recording is available only during MXF mode.
Ü REC` Recording
STBY` Record pause
Ü INT REC` Interval recording
INT STBY (INT flashes)` Interval record pause
Ü FRM REC` Frame recording
Ü FRM STBY` Frame record pause (after starting recording)
FRM STBY (FRM flashes)` Frame record pause (before starting recording)
Ü S&F REC` Slow & fast motion recording
S&F STBY` Slow & fast motion record pause
Ü PRE REC Pre-recording (after pressing the START/STOP button)
PRE REC STBY Pre-recording (before pressing the START/STOP button)
COP
Y