Aiwa AM-C75 - Manual (Page 14)

14
English A
B
PREPARATIONS
Connecting the headphones → A
Connect the supplied headphones to the
remote control and connect the remote
control to the OUTPUT jack of the main
unit.
HOLD switches → B
When operating with the main unit,
release HOLD on the main unit.
→ a
When operating with the remote control,
release HOLD on the remote control.
→ b
When not using the unit, set both to the
HOLD position.
→ c
Accidentally pressed buttons will not
function.
If buttons on the main unit are pressed
when the HOLD switch is set to the HOLD
position, “HOLD” appears.
HOLD
71
TROUBLESHOOTING GUIDE
If the unit fails to perform as described in
these Operating Instructions, check the
following guide.
Power does not turn on.
• Connect the AC adaptor firmly.
• Insert the batteries correctly.
• Recharge the rechargeable battery.
Operation does not start.
• Close the disc holder completely.
• Insert a disc.
• Release the HOLD switch.
• Connect the remote control completely.
Erroneous display/operation occur.
• Reset the unit by pressing the RESET
button on the bottom of the unit.
The sound noisy.
• If the unit is close to a magnetic object,
keep the unit further away from it.
Sound mutes.
• Place the unit on a stable surface with no
vibration.
Cannot record or edit.
• Release the HOLD switch.
• Connect the unit firmly.
• Use a recordable disc.
• Slide the protect-tab on the disc.
Sound cannot be heard from the
headphones.
• Connect the headphones firmly.
Recording date is not registered
correctly.
• Set the clock again.
• Recharge the rechargeable battery.
English
AM-F75 AEZ EGF Bklet 28/4/2000, 6:06 PM 14