Ampro Corporation COM 830 - Manual (Page 75)

Chapter 4 BIOS Setup Description
COM 830 Reference Manual 69
DMA Mode Auto
SWDMA0, 1, 2
MWDMA0, 1, 2
UDMA0, 1, 2, 3, 4, 5,
6 Set to AUTO to let the BIOS auto detect the supported DMA
mode.
SWDMA = Single Word DMA
MWDMA = Multi Word DMA
UDMA = Ultra DMA
S.M.A.R.T Auto
Disabled
Enabled Set to AUTO to let the BIOS auto detect hard disk drive
support.
Set to Disabled to prevent the BIOS from using SMART
feature.
Set to Enabled to allow the BIOS to use SMART feature on
supported hard disk drives.
32Bit Data
Transfer Disabled
Enabled Enable/Disable 32-bit data transfers on supported hard disk
drives.
ARMD
Emulation
Type Auto
Floppy
Hard disk drive ARMD is a device that uses removable media, such as the
LS120, MO (Magneto-optical), or Iomega Zip drives. If you
want to boot from media on ARMD, it is required that you
emulate boot up from a floppy or hard disk drive. This is
essentially necessary when trying to boot to DOS. You can
select the type of emulation used if you are booting such a
device.