Ampro Corporation COM 830 - Manual (Page 79)

Chapter 4 BIOS Setup Description
COM 830 Reference Manual 73
Hardware Monitoring Submenu
NOTE This setup node is only applicable if an external Super I/O has been
implemented on the carrier board.
Feature Options Description
H/W Health Function Disabled
Enabled Enable hardware health monitoring device and
display the readings.
Board Temperature no option Current board temperature.
CPU Temperature no option Current processor die temperature.
CPU Fan Speed no option Current CPU FAN speed.
VcoreA no option Current Core A reading.
+3.3VSB no option Current 3.3V standby reading.
+5VSB no option Current 5V standby reading.
+12Vin no option Current 12V in reading.
VBAT no option Current VBAT reading.