ArcSoft PDA Phone - Manual (Page 102)

102 Exchanging Messages
If there are no preset settings, tap New and enter the following
information, which you can get from your wireless service provider:
• Server name. A descriptive name, such as your wireless service
provider name.
• Gateway. Location of the MMS server, which is usually in the form
of an IP address.
• Port number. HTTP port number used for connecting to the MMS
server and for file transfer.
• Server address. URL address of the MMS server.
• Connect via. Select the connection that your device uses for MMS.
• Sending size limitation. Select the maximum MMS message size
allowed by your wireless service provider.
• WAP version. Select either WAP 1.2 or WAP 2.0, depending on
which one is being used by your wireless service provider.
6. Tap OK.
The MMS server settings will then be added as an entry on the MMS
Configuration screen.
Notes • If your device already has preset MMS settings, it is recommended that
you do not change these settings. If you change the preset settings, your
device may not be able to send and receive MMS messages.
• If you add several MMS service providers to the MMS Configuration
screen, you can choose one as your default MMS provider. Select the MMS
provider's name in the list then tap Set As Default.