ArcSoft PDA Phone - Manual (Page 72)

72 Setting Up Your PDA Phone
3. Connect the smaller end of the VGA cable to the VGA port on the
device.
4. Plug in the power cable of the external viewing device to a wall
socket and turn it on.
To enable TV Out
1. On the Today screen, tap Start > Settings > System tab > TV Out.
2. On the TV Out Settings screen, choose On on the drop-down menu.
3. Choose the Connection that you are using to output.
• Select VGA-out if you are doing a presentation such as a
Powerpoint presentation and you are outputting it to a projector.
• Select Composite & S-Video if you are going to output a video
to the external viewing device. Choose the Video standard to use
when outputting (e.g. If your video is in the NTSC video standard
and you select PAL, TV Out will convert your video to PAL before
outputting.)
4. Tap OK.
Note Audio output is supported.
To disable TV Out
1. On the Today screen, tap Start > Settings > System tab > TV Out.
2. On the TV Out Settings screen, choose Off on the drop-down menu.
3. Turn off the external viewing device and then unplug the power cord.
4. Disconnect the VGA cable’s smaller end from the device and then
disconnect the external viewing device’s cable from the VGA out
cable.
The Microdrive
To format the Microdrive
Your device comes with a built-in 8GB Microdrive® that gives you additional
storage space for your files. Use Format Microdrive to delete all the files in
the Microdrive and to format it.
1. Tap Start > Settings > Systems tab > Format Microdrive.
2. Enter 1234 in the box and tap Continue.