ArcSoft PDA Phone - Manual (Page 138)

138 Getting Connected
GPRS/EDGE
GPRS is a data service that allows information to be sent and received across
the wireless network. You can use GPRS to connect to the Internet or to
send and receive MMS on your device. You will be billed per KB (Kilobyte)
by your wireless service provider when you are sending or receiving
information via GPRS.
To add a new GPRS/EDGE connection
If GPRS settings are not preset on your device, obtain the Access point
name from your wireless service provider. Also, check with your wireless
service provider if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under MEdia Net, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line (GPRS, 3G), then tap
Next.
5. Enter the Access point name, then tap Next.